Stage 6 Honda Elite / Dio 107MM 460 GRAM CNC CLUTCH BELL
Being CNC-manufactured from one piece, this clutch bell has a very high precision, which raises this part over its conventional, pressed colleagues. The Stage6 R/T CNC Clutch Bells are available in three versions that vary in design and weight; thus it is now possible to influence torque and engine characteristics through the choice of the clutch bell. The designation on the bell (460,or 480) shows the weight in gram with a tolerance of 3 gram. The cooling ring has been turned into the part instead of simply shrunk onto it, as it is the case with conventional versions. Thanks to the three bores in the cooling jacket, you can now adjust the clutch engagement of Stage6 Torque Control MK I/II without having to remove the bell. Two indentures in the cooling ring give grip to lock the bell with the Stage6 clutch bell tool (optionally available) and undo the screw.
ATTENTION !!! Attention, this clutch bell can only be used with Piaggio/Peugeot engines that come with 3-shoe clutches (inner bell diameter = 107 mm); please check before ordering!!